• <samp id="eqi6c"><u id="eqi6c"></u></samp>
  • 新聞動態

    首頁 > 新聞動態
    我廠生產鈑金鋼的電纜槽模具
    發布人:管理員   發布時間:2020-12-18

    電纜槽模具主要是用于我們電力工程建設中,其可以用來生產電纜槽混凝土預制塊,使用模具進行預制塊的生產,可以很好的保證預制廠的生產速度。
    Cable trough mold is mainly used in our power engineering construction, which can be used to produce cable trough concrete precast block. Using mold to produce precast block can ensure the production speed of prefabrication plant.

    生產該模具的時候,我們一般采用的都是四毫米厚度的鋼板,然后為了保證模具的整體結構比較堅實,還會在外部加上筋條進行支撐,這樣生產出的模具產品非常耐用,不容易出現變形。
    When producing the mold, we usually use steel plate with thickness of 4mm. Then, in order to ensure the overall structure of the mold is relatively solid, the external ribs are added for support. In this way, the mold products produced are very durable and not easy to deform.

         

    我廠采用鈑金鋼作為生產電纜槽模具的主要生產材料,通過對模具進行外形上的剪切,然后將其進行拼接。生產模具時整體所需要耗費的成本較低,
    Our factory uses sheet steel as the main production material of cable trough mold. The shape of the mold is sheared and then spliced. The overall cost of mold production is low,

    并且我廠為了讓使用者使用的時候比較方便,我們將其設計成了可拆卸的樣式,可以加快生產預制塊時的脫模速度,可以有效的提升預制廠的產量。歡迎有購買意向者來電咨詢!
    And in order to make it more convenient for users, we designed it into a detachable style, which can speed up the demoulding speed when producing precast blocks, and can effectively improve the production of the prefabrication plant. Welcome to purchase intention to inquire!

     

    上一篇:沒有了
  • <samp id="eqi6c"><u id="eqi6c"></u></samp>
  • 少妇精油按摩高潮_18以下岁禁止1000部免费_久久精品一本到99热免费_国产在线无码不卡播放